Abrolhos Enterprise

Abrolhos EnterpriseThis 18.5 metre work vessel is of steel construction, stern wheel house, fitted with two (2) power auxiliaries, one (1) 14KVA single phase generator and one (1) 14KVA three phase generator.

This craft has been fitted with a 8.5 ton wire/hydraulic Hiab crane as well as three (3) x 3.5 ton hydraulic deck winches, capable of laying a four point mooring system to ensure secure on site stationing.

This craft is also capable of refuelling vessels at sea with her fuel holding capacity of 25,000 litres and two (2) bunkering calibrated meters, hoses and nozzles.

This vessel carries a 2B survey.

White Knuckles

White KnucklesThis vessel is an aluminium 7.5 metre centre console craft, powered by twin 225hp four stroke Yamaha outboards motors.

“White Knuckles” has a central “H” towing rack, along with exterior waterline towing points.

This vessel carries a 2C survey.

Screamin’ Southerly

This vessel is an aluminium 7.6metre forward wheelhouse craft, powered by a single 250hp Yamaha outboard motor. “Screamin’ Southerly” has a side opening door to allow easy access in and out of the water, along with a 750kg wire, side mounted pivoted davit.

This craft is survey exempt.


This vessel is an aluminium 6.2metre forward steering craft, powered by a single 200hp Yamaha outboard motor.

“McCloud” has a large open deck, and this craft operates well in tight areas, mostly used for sheltered water works.

This craft is survey exempt.

Twin Hull work barge

Twin Hull Work BargeThis pontoon is 6metres long by 2.6metres wide, flat deck, and is powered by a 60Hp Yamaha outboard motor.

This craft has a holding capacity of approx 3 ton, and is practically unsinkable with its H/D plastic pontoons.

This craft is survey exempt.

Dive Shack trailer

This command centre is mounted on a tandem trailer, but is capable of being lifted from the trailer and placed on board work vessels or wharf facilities.

From this centre we can oversee the workings of three (3) divers in the water simultaneously, if required.

Our underwater video systems can also be operated from this area, allowing our clients to hear and view the works at hand in air conditioned comfort.

Other Support vessels

  • 2 x 4.5metre aluminium dingys, powered by a 15hp or a 20hp Yamaha outboard motors,
  • 10′ inflatable dingy with solid flooring, powered by a 5hp Yamaha outboard motor.